Category Archives: 3D Printing

Prusa i3 Common Issues Troubleshooting

1. ATX Powersupply keeps turning off in the middle of a print. Most power supplies require a load on their 5V rails, which one is 5V? Any yellow wire to black ground wire will be 5 Volts. (Red to black will be 12Volts) You can either use high power 10 Watt 10 Ohm resistors, or… Read More »

Makerfarm Prusa i3 Build Walkthrough

Unboxing The kit arrived by UPS in a nice compact box that was packed very neatly and had plenty of bubble wrap. Now before we get into the assembly, it will be useful to know what all these parts are called so when you assemble them, you’ll know where they’re going. This would have… Read More »